NAME OF STUDENT: NOR WAHIDATUL HAQ BT MOHD RUSLAN
ID NUMBER: 51211210220
NAME OF SUPERVISOR: ABDUL HALIM B ABD RAHMAN
TITLE OF PROJECT: AUTOMATIC SMOKE ABSORBER MACHINE
ABSTRACT:
This proposal is about how to build one machine that has very smart function. As we can see, open burning is very harmful to our earth today. Smoke that from open burning will effect our ozone layer and will produce acid rain. This machine is functioning as absorber the smokes that come from burning. Smokes that come from burning process will absorbed by this machine by using water mist/ water sprays. Moreover, this machine is using alternate current (AC) power supply, so it is flexible to bring to anywhere.
INTRODUCTION:
First of all, I would like to thanks my supervisor that willing to conduct me to produce this machine. My supervisor’s name is Sir Abdul Halim B Abdul Rahman. He is very cooperative supervisor. For this project, I had planned to build one machine that has best function. From my wish, I would like to settle this project smoothly, so I must plan it very well, from the beginning until the end. These machines have a few objectives that I must apply to make sure this machine is useful to all people. The main target is to build multifunction machine that can absorbed the smoke while make burning process.
PROBLEM STATEMENT:
As we know, our ozone layer is not in good condition now. It is because the effects come mostly from open burning process. Ozone layer acts as protector to against harmful ultraviolet radiation from the sun. If our ozone layer is not in good condition, we that stay of earth surface will get the effect such as the temperature too high and ultraviolet radiation that can give disease to our skin. So from this situation, I wish to build up machine that can absorbed all the smoke that come from burning process with using water mist.
LITERATURE REVIEW:
From on my research to internet and magazine, I had not found anything about smoke absorber machine by using water mist. As far now, I just found that machine can absorbed the smoke but did not removed the smoke. That machine just only absorbed the heat by using fan such as cooler fan that we use to cool down the laptop. For my main target is a open burning situation, for this situation, we can see that most of the people just used the water to reduce the fire but they did not care about the smokes that spread to ozone layer. So here, I want to combine the process, by using this machine, it can absorbed the smoke by using water and neutralized all the smoke and lastly become water.
METHODOLOGY:
For this product, it is using alternate current (AC) power supply to operate. When the power is on, fan circuit will operate to pull up all the smoke and will allow the smoke go to pipe that have water mist system. At there, all the smoke will neutralized with that process. The water that comes from smoke neutralization process will be stagnant on water container and will be circulate for the next neutralization.
As we know, to this machine or this product, I must use the heat resistant material for make sure while the process runs the material will not melting because from the burning, the heat must be very high. The shaft and the fan that I want use must be heat resistant types. For the water mist/ water spray, this system is a highly effective extinguishing system that uses water and air to generate a fine water droplet. The Water Mist system uses less water than standard sprinkler systems and provides equivalent or better extinguishing characteristics than gas but without hazard to personnel. One of the characteristics this water mist system is uses less water per discharge than any conventional sprinkler. Post-discharge cleaning time is therefore negligible and consequential damages and losses are minimized. Operations can resume in the shortest time possible.
OBJECTIVE:
- - To build one multifunction machine name as automatic smoke absorber machine.
- - This machine absorbs the smokes automatically by using water mist or water spray.
- - To build one product that can save the environment
CONCLUSION:
For the conclusion, the product name as automatic smoke absorber machine. The main focus to build up this machine is to create something new that very useful to most of the people around the world that very loved to breathe in the good air. It is a multifunction machine. This machine will pull up the smoke that comes from burning process and absorbed the smoke with the neutralization process using water mist/ water sprays. This machine is a environmental concept. Main focus to I build this machine to save our environment that more and more worst day by day. As a lover to healthy environment, I wish to build up this machine for my final year projects. I hope I can fulfil my wish as I planned.
REFERENCE:
